2020 Toyota Camry Owners Manual - Opening and closing the windows

Opening and closing the windows

175

Closing

One-touch closing* Opening

One-touch opening*

*: To stop the window partway, oper- ate the switch in the opposite direc- tion.

Use this switch to prevent children from accidentally opening or clos- ing a passenger window.

The power windows can be operated when

Vehicles without a smart key system The engine switch is in the “ON” position.

Vehicles with a smart key system

The engine switch is in IGNITION ON mode.

176 3-5. Opening and closing the windows

Operating the power windows after turning the engine off

Vehicles without a smart key system

The power windows can be operated for approximately 45 seconds even after the engine switch is turned to the “ACC” or “LOCK” position. They can- not, however, be operated once either front door is opened.

Vehicles with a smart key system

The power windows can be operated for approximately 45 seconds even after the engine switch is turned to ACCESSORY mode or turned off. They cannot, however, be operated once either front door is opened.

Jam protection function

If an object becomes jammed between the window and the window frame while the window is closing, window movement is stopped and the window is opened slightly.

Catch protection function

If an object becomes caught between the door and window while the window is opening, window movement is stopped.

When the window cannot be opened or closed

When the jam protection function or catch protection function operates unusually and the door window cannot be opened or closed, perform the fol- lowing operations with the power window switch of that door.

Vehicles without a smart key system: Stop the vehicle. With the engine switch in the “ON” position, within 4 seconds of the jam protection function or catch protection function activating, continuously operate the power win- dow switch in the one-touch closing direction or one-touch opening direction so that the door window can be opened and closed.

Vehicles with a smart key system: Stop the vehicle. With the engine switch in IGNITION ON mode, within 4 seconds of the jam protection function or catch protection function activating, continuously operate the power win- dow switch in the one-touch closing direction or one-touch opening direc- tion so that the door window can be opened and closed.

3-5. Opening and closing the windows

177

If the door window cannot be opened and closed even when performing the above operations, perform the following procedure for function initialization.

1 Vehicles without a smart key system:

Turn the engine switch to the “ON” position.

Vehicles with a smart key system:

Turn the engine switch to IGNITION ON mode.

2 Pull and hold the power window switch in the one-touch closing direction and completely close the door window.

3 Release the power window switch for a moment, resume pulling the switch in the one-touch closing direction, and hold it there for approxi- mately 6 seconds or more.

4 Press and hold the power window switch in the one-touch opening direc- tion. After the door window is completely opened, continue holding the switch for an additional 1 second or more.

5 Release the power window switch for a moment, resume pushing the switch in the one-touch opening direction, and hold it there for approxi- mately 4 seconds or more.

6 Pull and hold the power window switch in the one-touch closing direction again. After the door window is completely closed, continue holding the switch for a further 1 second or more.

If you release the switch while the window is moving, start again from the beginning.

If the window reverses and cannot be fully closed or opened, have the vehicle inspected by your Toyota dealer.

Door lock linked window operation

Vehicles without a smart key system: The power windows can be opened and closed using the key.* (P. 143)

Vehicles with a smart key system: The power windows can be opened and closed using the mechanical key.* (P. 523)

The power windows can be opened using the wireless remote control.* (P. 142)

*: These settings must be customized at your Toyota dealer.

Alarm (if equipped)

The alarm may be triggered if the alarm is set and a power window is closed using the door lock linked power window operation function. (P. 83)

Power windows open warning buzzer

A buzzer sounds and a message is shown on the multi-information display in the instrument cluster when the engine switch is turned off and the driver’s door is opened with the power windows open.

Customization

Some functions can be customized. (P. 565)

178 3-5. Opening and closing the windows

WARNING

Observe the following precautions.

Failure to do so may result in death or serious injury.

Closing the windows

The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows. It is possible for children and other passengers to have body parts caught in the power window. Also, when riding with a child, it is recommended to use the window lock switch.(P. 175)

Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a window is being operated.

When using the wireless remote control, key or mechanical key and oper- ating the power windows, operate the power window after checking to make sure that there is no possibility of any passenger having any of their body parts caught in the window. Also do not let a child operate window by the wireless remote control, key or mechanical key. It is possible for chil- dren and other passengers to get caught in the power window.

When exiting the vehicle, turn the engine switch off, carry the key and exit the vehicle along with the child. There may be accidental operation, due to mischief, etc., that may possibly lead to an accident.

Jam protection function

Never use any part of your body to intentionally activate the jam protection function.

The jam protection function may not work if something gets jammed just before the window is fully closed. Be careful not to get any part of your body jammed in the window.

Catch protection function

Never use any part of your body or clothing to intentionally activate the catch protection function.

The catch protection function may not work if something gets caught just before the window is fully opened. Be careful not to get any part of your body or clothing caught in the window.

3-5. Opening and closing the windows

179

The moon roof stops slightly before the fully open position to reduce wind noise.

Press the switch again to fully open the moon roof.

*: Lightly press either side of the moon roof switch to stop the moon roof partway.

*: Lightly press either side of the moon roof switch to stop the moon roof partway.

: If equipped

180 3-5. Opening and closing the windows

The moon roof can be operated when

Vehicles without a smart key system The engine switch is in the “ON” position.

Vehicles with a smart key system

The engine switch is in IGNITION ON mode.

Operating the moon roof after turning the engine off

Vehicles without a smart key system

The moon roof can be operated for approximately 45 seconds after the engine switch is turned to the “ACC” or “LOCK” position. It cannot, however, be operated once either front door is opened.

Vehicles with a smart key system

The moon roof can be operated for approximately 45 seconds after the engine switch is turned to ACCESSORY mode or turned off. It cannot, how- ever, be operated once either front door is opened.

Jam protection function

If an object is detected between the moon roof and the frame while the moon roof is closing or tilting down, travel is stopped and the moon roof opens slightly.

Sunshade

The sunshade can be opened and closed manually. However, the sunshade will open automatically when the moon roof is opened.

Door lock linked moon roof operation

Vehicles without a smart key system: The moon roof can be opened and closed using the key.* (P. 143)

Vehicles with a smart key system: The moon roof can be opened and closed using the mechanical key.* (P. 523)

The moon roof can be opened using the wireless remote control.* (P. 142)

*: These settings must be customized at your Toyota dealer.

3-5. Opening and closing the windows

When the moon roof does not close normally

Perform the following procedure:

If the moon roof closes but then re-opens slightly Stop the vehicle.

Press and hold the “CLOSE” switch.*1

181

The moon roof will close, reopen and pause for approximately 10 sec- onds.*2 Then it will close again, tilt up and pause for approximately 1 sec- ond. Finally, it will tilt down, open and close.

Check to make sure that the moon roof is completely closed and then release the switch.

If the moon roof tilts down but then tilts back up Stop the vehicle.

Press and hold the “UP” switch*1 until the moon roof moves into the tilt

up position and stops.

Release the “UP” switch once and then press and hold the “UP” switch again.*1

The moon roof will pause for approximately 10 seconds in the tilt up posi- tion.*2 Then it will adjust slightly and pause for approximately 1 second. Finally, it will tilt down, open and close.

Check to make sure that the moon roof is completely closed and then release the switch.

*1: If the switch is released at the incorrect time, the procedure will have to be performed again from the beginning.

*2: If the switch is released after the above mentioned 10 second pause, automatic operation will be disabled. In that case, press and hold the “CLOSE” or “UP” switch, and the moon roof will tilt up and pause for approximately 1 second. Then it will tilt down, open and close. Check to make sure that the moon roof is completely closed and then release the switch.

If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer.

Alarm

The alarm may be triggered if the alarm is set and the moon roof is closed using the door lock linked moon roof operation function. (P. 83)

Moon roof open warning buzzer

A buzzer sounds and a message is shown on the multi-information display in the instrument cluster when the engine switch is turned off and the driver's door is opened with the moon roof open.

Customization

Some functions can be customized. (P. 565)

182 3-5. Opening and closing the windows

WARNING

Observe the following precautions.

Failure to do so may cause death or serious injury.

Opening the moon roof

Do not allow any passengers to put their hands or heads outside the vehi- cle while it is moving.

Do not sit on top of the moon roof.

Closing the moon roof

The driver is responsible for moon roof opening and closing operations.

In order to prevent accidental operation, especially by a child, do not let a child operate the moon roof. It is possible for children and other passen- gers to have body parts caught in the moon roof.

Check to make sure that all passengers do not have any part of their body in a position where it could be caught when the moon roof is being operated.

When using the wireless remote con- trol, key or mechanical key and operat- ing the moon roof, operate the moon roof after checking to make sure that there is no possibility of any passenger having any of their body parts caught in the moon roof. Also, do not let a child operate moon roof by the wireless remote control, key or mechanical key. It is possible for children and other pas- sengers to get caught in the moon roof.

When exiting the vehicle, turn the engine switch off, carry the key and exit the vehicle along with the child. There may be accidental operation, due to mischief, etc., that may possibly lead to an accident.

Jam protection function

Never use any part of your body to intentionally activate the jam protection function.

The jam protection function may not work if something gets caught just before the moon roof is fully closed. Also, the jam protection function is not designed to operate while the switch is being pressed. Take care so that your fingers, etc. do not get caught.

3-5. Opening and closing the windows

183

Slide and hold the switch backward. The electronic sun- shade will fully open automati- cally.*

Slide and hold the switch for- ward. The electronic sunshade will fully close automatically.*

*: Quickly slide and release the electronic sunshade partway.

switch in either direction to stop the

When the panoramic moon roof is tilted up, the electronic sunshade will open to the half-open position of the roof.

*: Lightly press the switch again to stop the panoramic moon roof partway.

The panoramic moon roof can be tilted down only when it is in the tilt-up position.

: If equipped

184 3-5. Opening and closing the windows

Slide and hold the switch backward. The panoramic moon roof and electronic sunshade will open automatically.

The panoramic moon roof can be opened from the tilt-up position.

*: Quickly slide and release the switch in either direction to stop the panoramic moon roof partway.

Slide and hold the switch forward. The panoramic moon roof will fully close automatically.

The panoramic moon roof can be operated when

The engine switch is in IGNITION ON mode.

Operating the panoramic moon roof after turning the engine off

The panoramic moon roof and electronic sunshade can be operated for approximately 45 seconds after the engine switch is turned to ACCESSORY mode or turned off. They cannot, however, be operated once either front door is opened.

Jam protection function

If an object is detected between the panoramic moon roof and the frame in the following situations, travel is stopped and the panoramic moon roof opens slightly:

The panoramic moon roof is closing or tilting down.

The electronic sunshade is closing.

Door lock linked panoramic moon roof operation

The panoramic moon roof can be opened and closed using the mechanical key.* (P. 523)

The panoramic moon roof can be opened using the wireless remote con- trol.* (P. 142)

*: These settings must be customized at your Toyota dealer.

3-5. Opening and closing the windows

Closing both the panoramic moon roof and electronic sunshade

Slide the switch forward.

185

The electronic sunshade will close to the half-open position and pause. The panoramic moon roof will then fully close. Then the electronic sunshade will fully close.

When the panoramic moon roof or electronic sunshade does not close normally

Perform the following procedure:

Stop the vehicle.

Turn the engine switch to IGNITION ON mode.

Slide and hold the switch or switch forward. Continue pressing the switch for approximately 10 seconds after the panoramic moon roof or

electronic sunshade closes and reopens. The panoramic moon roof and electronic sunshade will start to close.*

Check that the panoramic moon roof and electronic sunshade are fully closed and release the switch.

*: If the switch is released at the incorrect time, the procedure will have to be performed again from the beginning.

If the panoramic moon roof or electronic sunshade does not fully close even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.

Alarm

The alarm may be triggered if the alarm is set and the panoramic moon roof is closed using the door lock linked panoramic moon roof operation function. (P. 83)

Panoramic moon roof open warning buzzer

A buzzer sounds and a message is shown on the multi-information display in the instrument cluster when the engine switch is turned off and the driver’s door is opened with the panoramic moon roof open.

Customization

Some functions can be customized. (P. 565)

186 3-5. Opening and closing the windows

WARNING

Observe the following precautions.

Failing to do so may cause death or serious injury.

Opening and closing the electronic sunshade

Check to make sure that all passengers do not have any part of their body in a position where it could be caught when the electronic sunshade is being oper- ated.

Do not let a child operate the electronic sunshade. Closing the electronic sun- shade on someone can cause death or serious injury.

Opening and closing the panoramic moon roof

The driver is responsible for panoramic moon roof opening and closing operations.

In order to prevent accidental operation, especially by a child, do not let a child operate the panoramic moon roof. It is possible for children and other passengers to have body parts caught in the panoramic moon roof.

Check to make sure that all passengers do not have any part of their body in a position where it could be caught when the panoramic moon roof is being oper- ated.

When using the wireless remote control or mechanical key and operating the panoramic moon roof, operate the pan- oramic moon roof after checking to make sure that there is no possibility of any passenger having any of their body parts caught in the panoramic moon roof. Also, do not let a child operate panoramic moon roof by the wireless remote control or mechanical key. It is possible for children and other passen- gers to get caught in the panoramic moon roof.

When exiting the vehicle, turn the engine switch off, carry the key and exit the vehicle along with the child. There may be accidental operation, due to mischief, etc., that may possibly lead to an accident.

3-5. Opening and closing the windows

187

188 3-5. Opening and closing the windows